Slide Trust Resources Group

WELCOME TO

Slide

Trust Resources Consumer
Foods & Beverage (TRCFB)

Slide TRUST
RESOURCES LTD.

TRUST FEATURED PRODUCTS

Trust Mosquito Coil (Nimpata)- ট্রাষ্ট মশার কয়েল নিমপাতা

৳ 100
  • মশার কয়েলের গুনাবলী
  • কম ধোঁয়া ও অত্যন্ত দ্রুত মশা তাড়ায়।
  • চোখ জ্বালাপোড়া করবে না।
  • সহজেই আলাদা করা যায়।
  • 10/12 ঘন্টা পর্যন্ত আপনার ঘর মশা মুক্ত রাখে এবং আপনার পরিবারকে সুরক্ষা দেয়।
  • কোন প্রকার ক্ষতিকর ডিউটি ও এন্ড্রিন নেই।

Trust Hand Sanitizer Gel – ট্রাষ্ট হ্যান্ড স্যানিটাইজার (জেল )

৳ 75
It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.

SHEARING MACHINES

SHEARING MACHINES Description: UNIVERSAL SHEARING MACHINE WITH SINGLE SHEARING ROLLER. ADJUSTMENT CUTTING DISTANCE (0.02mm) -TOUCH-SCREEN DISPLAY -AUTOMATIC SEAM DETECTOR -INVERTER CONTROL SUITABLE TO PROCESS ALL KIND OF FABRICS WORKING WIDTH 1800mm-3400mm Shearing of all kinds of fabrics, woven, knitted and warp-knitted; High performance shearing.

WNS Gas (or oil) Fired Boiler

henan yuanda boiler factory 10 ton oil gas fire tube boiler 6000kg boiler with gas burner automatic oil gas boiler 8 ton henan yuanda boiler factory WNS Gas(or oil) Fired Boiler Boiler with oil / gas burner | Oil gas fire tube boiler | Oil gas fire tube boiler WNS oil/gas boiler series is the packaged 3-pass wet back fire tube boiler, can produce steam or hot water. This boilers are fully automatic, safe and designed to operate on a wide range of liquid and gaseous fuels like heavy oil, light oil, gas, and dual fuel options. Output: steam Thermal Capacity: 0.2-40 ton/h, 15hp-2500hp Styles: horizontal Available Fuel: natural gas, LPG, heavy oil, diesel, dual fuel etc Applied Industries: food, beverage, feed mill, textile mill, paper mill, packaged, refinery, chemical, pharmaceutical

Trust Hexil – ট্রাষ্ট হেক্সিল

৳ 25৳ 110
It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.

TRUST CONSUMER PRODUCTS

Stainless Steel Scourer

৳ 20৳ 35
ট্রাস্ট মাজুনী উচ্চমান সম্পন্ন ষ্ট্রেইনলেস ষ্টীল দ্বারা তৈরী জং ধরে না ও অধিক কাজে ব্যাবহার্য। দীর্ঘস্থায়ী ও শক্ত মাজুনীর উপরিভাগের

Trust Detergent Powder- ট্রাষ্ট ডিটারজেন্ট পাউডার

৳ 30৳ 55
ধোয়ার আগে করণীয়ঃ
  •  ব্যবহারের আগে আপনার রঙিন কাপড়ের ছোট এক অংশ ধয়ে কাপড়ের রঙ ওঠে কিনা দেখে নিন। কেননা ফেব্রিকের রঙ পাকা না হলে তা উঠে ওয়াশিং মেশিন কিংবা বালতিতে রাখা অন্যান্য কাপড়ের রঙকেও নষ্ট করে দিতে পারে।

Trust Dish Wash – ট্রাষ্ট ডিস ওয়াশ

৳ 45৳ 90
Concentrated Dish washing Liquid effectively removes tough grease and stains on dishes. It leaves your dishes squeaky clean and gentle to hands. Squeeze small amount of dish washing liquid into a container. Dilute with water. Wash dishes with a sponge or dish cloth. Rinse Well.

Trust Hand Sanitizer Gel – ট্রাষ্ট হ্যান্ড স্যানিটাইজার (জেল )

৳ 75
It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.

Trust Hexil – ট্রাষ্ট হেক্সিল

৳ 25৳ 110
It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.

Trust Mosquito Coil – ট্রাষ্ট মশার কয়েল

৳ 60
সতর্কীকরণঃ
পেটে গেলে ক্ষতিকর। খাদ্যদ্রব্য ও শিশুদের নাগালের বাইরে রাখুন। আগুন থেকে দুর্ঘটনা এগাতে সতর্কতার সাথে ব্যবহার করুন।
> কয়েল জ্বালিয়ে 20 মিনিটের জন্য দরজা-জানালা বন্ধ  রাখুন। > দরজা এবং জানালা থেকে কয়েল দুরে রাখুন। > সর্বাধিক কার্যকরিতার জন্য ফ্যানের বাতাস থেকে কয়েলটি দুরে রাখুন।
 

Trust Mosquito Coil (Nimpata)- ট্রাষ্ট মশার কয়েল নিমপাতা

৳ 100
  • মশার কয়েলের গুনাবলী
  • কম ধোঁয়া ও অত্যন্ত দ্রুত মশা তাড়ায়।
  • চোখ জ্বালাপোড়া করবে না।
  • সহজেই আলাদা করা যায়।
  • 10/12 ঘন্টা পর্যন্ত আপনার ঘর মশা মুক্ত রাখে এবং আপনার পরিবারকে সুরক্ষা দেয়।
  • কোন প্রকার ক্ষতিকর ডিউটি ও এন্ড্রিন নেই।

Trust Toilet Cleaner

৳ 80৳ 100
ট্রাস্ট টয়লেট ক্লিনার সাধারণ ক্লিনারের থেকে এক্সট্রিম শক্তিশালী। সবচেয়ে কঠিন দাগ দূর করার ক্ষেত্রে এটি কার্যকরী।এর নতুন ঘন ফর্মূলার লিকুইড ছড়িয়ে পরে টয়লেট এর পুরো জায়গা জুড়ে এবং ধ্বংস করে সব ধরণের ভাইরাস ও ব্যাকটেরিয়া, যা নিশ্চিত করে সম্পুণ পারিস্কার ও জীবাণুমুক্ত টয়লেট।

Textile Machines since 1961

CARU

Machine Caru s.r.l, italy

SHEARING MACHINE

UNIVERSAL SHEARING MACHINE WITH SINGLE SHEARING ROLLER. ADJUSTMENT CUTTING DISTANCE (0.02mm) -TOUCH-SCREEN DISPLAY -AUTOMATIC SEAM DETECTOR -INVERTER CONTROL SUITABLE TO PROCESS ALL KIND OF FABRICS WORKING WIDTH 1800mm-3400mm Shearing of all kinds of fabrics, woven, knitted and warp-knitted; High performance shearing.

LASER ENGRAVING [LS100]

LASER ENGRAVING [LS100] Description: LASER ENGRAVING MACHINE LSC100 激光雕刻机 ENGRAVING MACHINE SUITABLE FOR RUBBER ROLLER AND RUBBER SLEEVES. Laser engraving machine type LSC120 The laser engraving machine has two main parts: a laser source and a controller system. The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The point where the laser beam touches the surface of the roller should be on the focal plane of the laser’s optical system, and is usually synonymous with its focal point. This point is typically small, less than a fraction of a millimeter (depending on the optical wavelength). Only the area inside this focal point is significantly affected when the laser beam passes over the surface. The energy delivered by the laser changes the surface of the material under the focal point. This is how material is removed from the surface to create an engraving. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving. The speed at which the beam moves across the material is also considered in creating engraving patterns. Changing the intensity and spread of the beam allows more flexibility in the design. For example, by changing the proportion of time (known as “duty-cycle”) the laser is turned on during each pulse, the power delivered to the engraving surface can be controlled appropriately for the material. Characteristics: PLC Control, Touch-Screen; The word Laser is actually an acronym LASER L is for Light A is for Amplification S is for Stimulated E is for Emission R is for Radiation

CORDUROY BLADE SHARPENING

CORDUROY BLADE SHARPENING Description: CORDUROY BLADES SHARPENING MACHINE; The AFFI X model machine is used to grind and to sharp knives for cutting corduroy fabrics; Two special hard diamond-coated grinding wheels turn at high speed to obtain an excellent knife sharpness. The fine adjustment of the contact on the knife is done by the means of centesimal positioning screws and a pneumatic system will perform a cycle in steps. The machine is equipped with a device for the positioning, clamping and quick release of the knife.

DUST CLEANING BRUSHING MACHINE SP200

DUST CLEANING BRUSHING MACHINE SP200 Description: LINT/ DUST REMOVAL MACHINE This brushing/cleaning machines is an efficient group easily applicable in front of any machine or stand alone. Four brushes are working at the same time on the front and on the back of the fabric to assure the maximum efficiency. The type of brushes depend from the kind of fabric processed. Its small dimension let it to be suitable for different applications. The contact of the brushes to the fabric can be easily adjusted by the means of an electric actuators. In the bottom of the machine a special electronic sensor, let’s the fabrics lay in a cradle without tension before the entry of the fabrics in to the machine. Special hoods on the bottom of the machine’s frame lets the suction air catch all the dust from the beating/brushing process; The air is collected to a separate suction fan with filter unit. The machine can be delivered with the follow additional parts: Electric control panel complete of: general power switch, power on light, start /stop brushes, start/stop suction, inverter for the motor of the brushes, speed adjusting potentiometer, display for brush speed, switch for brush position, fuses, emergency button stop circuit. Characteristics:

SHAOYANG

High Tech Group. Shaoyang Textile Machinery Co.Ltd (CHTC)-Chines Gov. Factory

M5469 stentering boarding machine

Product uses This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 70-400g/m2. Main technical index Form: heated air circulation, single layer horizontal type Vehicle category: left hand or right hand Nominal width(mm): 1800-3600 Amplitude modulation range(mm): 700-(Nominal width-200 mm) Speed range: 5-100m/min Over-feed ratio: -10% - +30 Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity, saturated vapor Cloth holding method: needle clamp, cloth clamp, double use clamp Cropping form: simple pendulum type; or double use Edge detecting form: high precision infrared Guide rail form: no lubricating oil lubricating oil guide rail Installed capacity: (55+n×15)kW Features 1. High precision infrared edge detecting instrument, powerful antijamming capability; 2. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life; 3. Multistage fabric width adjustment; 4. Front and back double multistage operation system, PLC control system, convenient for operation; 5. Landing minor-cycle building block system oasthouse, small volume, large blast capacity; 6. Frequency converting control, high efficient heated air circulation system; 7. Special nozzle displacement;

M5471 knitting stentering boarding machine

Product uses This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2. Main technical index Form: heated air circulation, single layer horizontal type Vehicle category: left hand or right hand Nominal width(mm): 1800-3600 Amplitude modulation range(mm): 700-(Nominal width-200 mm) Speed range: 5-100m/min Over-feed ratio: -10% - +30 Oasthouse temperautre: 100-230ºC Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity Cloth holding method: needle clamp Cropping form: simple pendulum type; or double use Edge detecting form: High precision infrared edge detecting Guide rail form: no lubricating oil steel plate guide rail Size: (16115+n×3000)×(W+2500)mm×2300mm Installed capacity: (55+n×15)kW Features 1. Active infrared, synchronous with main engine; 2. E+L tension sensor controlled padder, realizing low tension and constant tension running; 3. E+L infrared edge detecting indstrument, excellent antijamming capability; 4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life; 5. 9 section width adjustment; 6. Heat-carrying oil heating method, high accuracy; 7. Front and back double multistage operation system, PLC control system, convenient for operation; 8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity; 9. Frequency converting control, high efficient heated air circulation system; 10. Special nozzle displacement;

Mazza Gianni S.a.s

Industrial Brush

CUTTER CYLINDER

Description

The aim of this cylinder is the cutting and the elimination of the yarns that aren’t levelled by the shearing machine

Manufacturing Features

  • Manufactured in tube in a special steel, rectified and chromium-plated
  • Pivots rectified and shrinking on
  • Blades support in stainless steel
  • Cutter applied following the working need
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, grant the respect of the functional features and of the safety regulations
 

Functional Features

  • Dynamic balancing with certification related to the speed required by the Customer
  • Longitudinal and torsional rigidity suitable for avoiding undesired deformations vibration
  • Maximum simplicity in the substitution of the damaged cutters
  • Long working life even in hard exercise conditions

CYLINDER BRUSH

Description

The aim of these brushes is the cleaning, the polishing of the fabric during the different working phases, especially in the working and in the finishing of the fabrics in wool

Manufacturing Features

  • Internal part in tube in stell
  • Pivots in steel, shrinking on
  • Covered with tube in moplen
  • Trimmed with horse hair, bristle, nylon, tampico
  • The bristle disposition can be full, helical, bi-helical
  • Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, grant the respect of the functional features and of the safety regulations
 

Functional Features

  • Dynamic balacing with certification related to the speed required by the Customer
  • Longitudinal and torsional rigidity suitable for avoiding undesired deformations and vibrations
  • Long working life even in hard exercise conditions

CYLINDER BRUSH FOR PRINTING MACHINE

Description

These cylinder brush are able to remove the traces of colour left on carpets during the printing phase

Manufacturing Features

  • Internal part tube in steel
  • Heads and pivots in steel or inox, shrinking on. The pivots are rectified and if required, they are fixed by screws in order to facilitate the substitution
  • There is a special covering for the tube in steel in order to avoid the corrosion due the chemical agents
  • The bristle disposition can be full, helical and bi-helical
  • Normally trimmed with bristles in nylon, but on request, it can be supplied with any other kind of material
  • Turned and levelled surface for a perfect circularity and concentricity respect to the axe of rotation
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, grant the respect of the functional features and of the safety regulations

CYLINDER BRUSH FOR REASING MACHINE IN EXTRUSION IN ALVEOLAR ALUMINIUM

Description

The aim of this cylinder is the cleaning of the reasing cylinder. With this new brush typology it has been possible to insert the simple interchangeability of the damaged brush plates, by reducing in a satisfactory way the stop of the machine and, in the meanwhile, it has been inserted a new support concept in alveolar aluminium that reduces notably the mass in rotation.

Manufacturing Features

  • Internal part in alveolar aluminium patented
  • Pivots in steel, rectified, and shrinking on
  • Covered with staves in aluminium patented for the brush plates fixing in nylon or metallic
  • Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, grant the respect of the function al features and of the safety regulations
 

Functional Features

  • Dynamic balancing with certification related to the speed required by the Customer

CYLINDER BRUSH FOR WOOL CARDING

Description

The aim of the carding is to realize the fibres separation, by releasing them from the impurities still present and by completing the opening and the cleaning started in the previous passages. The cylinder has to keep clean the carding rolls during the working process

Manufacturing Features

  • Internal part in tube in steel
  • Heads and pivots in steel shrinking on
  • The pivots are rectified
  • Covered with staves in wood
  • Covered with jacket in aluminium
  • Normally trimmed with bristles in tampico or in a special mixing, in order to eliminate the electrostatic electricity accumulation
  • Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, grant the respect of the functional features and of the safety regulations
 

Functional Features

  • Dynamic balacing with certification, related to the speed required by the Costumer

CYLINDER BRUSH WITH THERE STAVES FOR THE RAISING MACHINE

Description

The aim of this cylinder is the cleaning of the teasiling cylinder. With this new brush typology, it has been possible to insert the simple interchangeability, of the damaged brush plates, by reducing in a satisfactory, way the stop of the machine and it has been possible to insert brushes with elevated heights until 4600mm. Thanks to the special antivibrating element that makes them more rigid and more compact

Manufacturing Features

  • Internal part in tube in special steel
  • Special antivibrating element
  • Pivots in steel, rectified and shrinking on
  • Covered with staves in aluminium patented for the brush plates fixing in nylon or metallic
  • Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, gran the respect of the functional features and of the safety regulations
 

Functional Features

  • Dynamic balancing with certification related to the speed required by the Customer
  • Longitudinal and torsional rigidity suitable for avoiding undesired deformations and vibrations
  • Maximum simplicity in the substitute on the damaged brush plates
  • Long working life even in hard exercise conditions

LAPPING BRUSHES

Description

The aim of these bushes is to have a homogeneous lapping effect, avoiding any problems of rows and folds over the entire surface of the fabric.

Manufacturing Features

  • Manufactured with a tube of special steel
  • The pins are ground and hot introduced
  • A wide choice of grain and abrasive section
  • The hole is specially arranged so to allow the tissue to remain stretched all the time
  • Manufactured in accordance with the Costumer’s dimensions and features
  • The materials and the machining processes we use are a guarantee for complying with the functional features and the safety standards
 

Functional Features

  • Dynamic balance with certification, based on the speed requested by the Customer
  • Longitudinal and torsion stiffness suitable for avoiding unwanted deformation and vibrations
  • A high resistance of the abrasive bristles, even under hard working conditions and on several kinds of tissues

LAPPING BRUSHES EQUIPPED WITH CERAMIC COATED BRISTLES

Description

The iam of these brushes is to have a homogenous effect of grinding, avoiding problems of rows and folds over the entire surface, producing new effects on the fabric

Manufacturing Features

  • Manufactured in a special aluminium
  • Bristles in rilsan resistant at high temperatures
  • The bristles are placed on a tile in aluminium with hand-made sewings, in order to grant a higher bristle tightness, for the great effort to which it is subjected
  • Turned and levelled external surface for a perfect circillarity and concentricity respect to the axe of rotation
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, grant the respect of the function al features and of the safety regulations
 

Functional Features

  • Possibility to assemble the tiles on the surface of any other cylinder
  • Maximum easyness in the substitution of the damaged tiles
  • Long working life even in hard exercise conditions

RIBBONS BRUSH TRIMMED

Description

The aim of these ribbons is the interchange ability simplicity, at the present in use both for the teasiling machine and for the wool carding machines and for the other workings where there is the need of an immediately replacement

Manufacturing Features

  • Manufatured with a special base, with more levels, that allows to avoid deformations during the working phases
  • The trimming can be with the application of horse hair, bristle, nylon, tampico
  • The materials and the working processes used, grant the respect of the functional features and of the safety regulations
 

Functional Features

  • Application simplicity on any surface, circular of flat
  • Longitudinal and torsional rigidity suitable for avoiding undesired deformations
  • Long working life even in hard exercise conditions

Jiangsu Xinlian

Jiangsu Xinlian Printing & Dyeing Mach. Co., Ltd.

Broadenwin

Broadenwin machinery Jiangsu Co., Ltd

BENDCON-Y

This machine can be applied to cotton, chemical fiber, hemp, wool and its blended fabric finishing calendering; it can also be used for polypropylene, nylon, polyester, polyethylene, polypropylene and other materials and paper finishing calendering. By adjusting the hydraulic valve inside the nylon roll, when the different pressure is applied to the roller surface, the nylon roller is automatically adjusted to achieve uniformity of the linear pressure of the entire nip. After calendering, the product can achieve much better effect of thickness, gloss and other uniformity than normal calendering. This machine can also withstand higher steel roller temperature and higher linear speed while operating. Product advantages:1.Nominal width: 1800-3400mm 2.Working speed: 20-70m / min 3.Design pressure: 60-100T

Film calender (double side pressure three roller calender)

Film calender (double side pressure three roller calender) This machine can be applied to pure cotton, chemical fiber, hemp, wool spinning and blended fabric calendering finishing;the middle roller of the equipment is fixed roller, the upper and lower rollers can respectively to the intermediate pressure. When the fabric pass the machine once, it can be calendering one time or be twice. After calendering the fabrics can achieve evenly shiny and good touching feeling. The equipment is also very save costs. Product advantages:1.Nominal width: 1800-5000mm 2.Working speed: 20-70m / min 3.Design pressure: 60-120T

Stepless pressure regulation S-Roll calender(Double side pressure type)

Double side pressure type Double side pressure type stepless pressure regualtion S-Roll calender combined with double-pressure technology and uniform stepless pressure roller technology, the middle roller of the equipment is fixed roller, the upper and lower rollers can respectively to the intermediate pressure. When the fabric pass the machine once, it can be calendering one time or be twice. After calendering the fabrics can achieve evenly shiny and good touching feeling. The equipment is also very save costs. Product advantages:1.Nominal width: 1800-3600mm 2.Working speed: 20-70m / min 3.Design pressure: 60-100T

Stepless pressure regulation S-Roll calender(Single pressure type)

Stepless pressure regualtion S-Roll calender has the following characteristics: • Utilize the stepless pressure regulation S-Roll, achieve the uniform line pressure by adjusting the oil pressure in the two semi-circular chambers. • The elastic roller sleeve coated on the stepless pressure regulation S-Roll roller can better recover the deformation of the roller. • The S-Roll roller is controlled by hydraulic system. • The S-Roll roller is auxiliary driven by oil motor. • HMI ( Whole machine monitoring, Process parameter settings, Seam detection animated display, Hydraulic system pressure display, Fault diagnosis, Alarm information) • Roller sleeve change is quick and easy, no need to have a large-scale demolition the sofy roller sleeve made of synthetic material cam be exchanged from the side pipe rack of the calender, to minimize the downtime. The sleeve can be selected in calendering process ( such as calendering, electro-optical, embossing, soft calendering and silk finishing). Product advantages: 1.Nominal width: 1800-3600mm 2.Working speed: 20-70m / min 3.Design pressure: 60-100T

Two-roll calender

Two-roll calender This product is a two-roll calender, through different permutation and combination of mirror roller, nylon roller, wool roller, cotton roller and rubber roller, to make the fabric through different materials’ calendering area, and obtain the different required calendering effect. 1, with the nylon roller calendering effect: smooth, luster, flat. 2, with the wool roller calendering effect: smooth, luster, flat, soft. 3, with the cotton roller calendering effect: smooth, flat, soft. 4, with the rubber roller calendering effect: smooth, luster, flat, soft. Product advantages:1.Nominal width: 1800-5000mm 2.Working speed: 20-70m / min 3.Design pressure: 60-120T

YUANDA BOILER

Yuanda Boiler Ltd-Chana

Diesel / Heavy Oil Boiler

Diesel / Heavy Oil Boiler Yuanda Boiler since 1956 Oil fired boiler is the 3-pass wet back boiler, can produce steam or hot water. This type boilers are fully automatic, safe, energy saving and designed to operate on a wide range of liquid and gaseous fuels like heavy oil, light oil, gas, and dual fuel options. Output: steam Capacity: 0.5-40 ton/h, 15hp-2500hp Styles: horizontal Available Fuel: heavy oil, diesel, furnace oil, waste oil, dual fuel, etc Applied Industries: food, beverage, diaries, feed mill, garment, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc

Electric Steam Boiler

Electric Steam Boiler Electric steam generator boiler | Horizontal electric boiler | Eco-friendly boiler Horizontal electric automatic boiler is a kind of 99.8% efficiency which takes electricity as energy. It has the advantages of environmental protection, no pollution, no noise, convenient installation, small occupation Output: steam Thermal Capacity: 0.2ton/h-4ton/h 100kg/h-4000kg/h Styles: horizontal or vertical Powered by: electricity Applied Industries: food, beverage, diaries, feed mill, garment, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc

LSS Once Through Steam Boiler

LSS Once Through Steam Boiler Vertical water tube steam boiler | Quick steam generator | Small steam boiler LSS Once through steam boiler is vertical type boiler with small steam capacity, also named quick steam boiler/generator, two stage flame, it could generate steam within 3~5 minutes, is the embodiment of high technology Output: saturated steam Thermal Capacity: 200-2,000kg/hr 120-1,400kw/h Styles: horizontal/vertical, fire tube/water tube Available Fuel: heavy oil, diesel, furnace oil, biogas, NG, CNG, LNG, LPG, dual fuel Applied Industries: food, beverage, feed mill, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc

Rice Husk Fired(rice mill) Boiler

Chain Grate Coal or Biomass Boiler Coal biomass fired boiler | Solid fuel fired boiler | Grate stoker boiler Chain grate boiler is a fully automatic coal/biomass fired boiler, can produce steam/hot water as transfer medium, grate combustion, adopts water&fire tube structure, high steam quality, anti coking, and sufficient output, etc. Output: steam, hot water Thermal Capacity: 500-40,000kg/hr 120-28,000kw/h Styles: horizontal/vertical Available Fuel: solid fuel, coal, biomass, wood, palm shell, husks etc Applied Industries: food, beverage, diaries, feed mill, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc Working Pressure 0-2.5 mpa

Vacuum Hot Water Boiler

Vacuum Hot Water Boiler Boiler with oil/gas burner | Central heating boiler | Boiler for heating Vacuum hot water boilers also named vacuum phase change hot water boiler. There is a vacuum condition inside, fill heat medium water in furnace and heat these water through oil/gas. Through heat exchange, the heat inside the boiler is transfered to outside water. Transfer medium: hot water Thermal Capacity: 0.3-7 mw 300-7,000 kw/h 200,000-6,000,000 Kcal/h Efficiency: 99.9% Available Fuel: heavy oil, diesel, furnace oil, biogas, NG, CNG, LNG, LPG, dual fuel Applied Industries: heating & drying like: food, beverage, wood chamber, greenhouse, building heating, hotel, school, etc

WNS Gas (or oil) Fired Boiler

henan yuanda boiler factory 10 ton oil gas fire tube boiler 6000kg boiler with gas burner automatic oil gas boiler 8 ton henan yuanda boiler factory WNS Gas(or oil) Fired Boiler Boiler with oil / gas burner | Oil gas fire tube boiler | Oil gas fire tube boiler WNS oil/gas boiler series is the packaged 3-pass wet back fire tube boiler, can produce steam or hot water. This boilers are fully automatic, safe and designed to operate on a wide range of liquid and gaseous fuels like heavy oil, light oil, gas, and dual fuel options. Output: steam Thermal Capacity: 0.2-40 ton/h, 15hp-2500hp Styles: horizontal Available Fuel: natural gas, LPG, heavy oil, diesel, dual fuel etc Applied Industries: food, beverage, feed mill, textile mill, paper mill, packaged, refinery, chemical, pharmaceutical

AUTOMATION PRODUCTS

Industrial all Automation Products

H-BOX

H-BOX is an IoT terminal device, it supports all the functions of the HT3000 except that it has no screen, you can use mobile phone, PAD, PC as its screen. Perfectly realize all functions of IoT through HNC cloud platform, cloud engine and cloud APP. HNC Cloud is a cross-platform industrial Internet of Things cloud platform that supports PC, iPad, Android,and iOS multi-platform terminals. Simply put, HNC Cloud is a complete set of cloud service solutions forthe automation industry. It covers HNC Cloud website, cloud configuration, cloud HMI, cloud APP and other products. Through the HNC cloud platform, users can remotely access machines and equipment on the site thousands of miles away, realize remote monitoring and maintenance of HMI and PLC, realize remote programming, firmware upgrade, diagnosis, monitoring and debugging, etc. In summary, the HNC cloud platform has 9 major Features, it can help users realize the functions of cloud networking, cloud access, cloud video, cloud alarm, cloud engine, cloud management, cloud security, cloud translation and cloud map. The HNC Cloud provides a secure communication mechanism. It uses 128-bit SSL encryption to ensure stable data transmission. A-Key and B-Key protection mechanisms are also set up on the device side to ensure the safety and reliability of remote access devices. The IoT BUS APP supports iPad, Android, and iOS multi-platform terminals. Users can search for “IoT Bus” for free download through the major APP application stores.

HCS Series Card type PLC

HCS series is a new series of economical card type PLC, ptimized structure, innovative communication, PID and other powerful instructions for easy programming, built-in cloud engine. MPU built-in Ethernet+ RS485, some MPU integrated analog interface. Hardware features: 1. Easy selection: Product model naming is easy to understand and convenient for model selection. 2. Structure optimization: Optimized structure design, compact size, beautiful appearance, saving installation space. 3. Easy wiring: Direct insert terminal, humanized design, more convenient wiring. 4. Integrated analog interface: The PLC main unit integrates DI/DO and AI/AO with flexible configuration and higher cost performance. 5. Ethernet + : Ethernet and RS485 interfaces are standard on the PLC main unit, supporting simultaneous operation of two communication ports. Each communication port can be programmed and networked as a master or slave station. 6. Unlimited networking: PLC main unit can be networking, theoretically can form unlimited points control network, a perfect substitute for medium or even large PLC system. 7. Perfect temperature control: Thermal resistance, thermocouple and unique temperature& humidity sensor modules, etc., perfectly meet the application requirements of process control. 8. Communication + : Communication extension module with isolation to meet stable communication extension requirements. Programming software features: 1. Three programming languages: HPMaster is a PLC programming software conforming to IEC 61131-3, which supports LD (ladder diagram), FBD (function block diagram) and IL (instruction table). 2. Good compatibility: Stable operation in Win98, Win200X, WinXP, Win7, Win8, Win10 and other operating systems. 3. Prompt message and help function: All instructions and detailed information of hardware modules can be opened in the software through F1 key to find the answer. Even if HPMaster programming software is used for the first time, the program can be easily written. 4. Three-level password protection: Password for project files, password for PLC, password for individual program blocks, and protection functions such as preventing program upload. 5. Modular program project structure: Up to 63 program blocks can be established (including main program, subroutine, interrupt program), programming language can be chosen arbitrarily, execution order of program blocks can be adjusted arbitrarily, each block can be imported and exported separately and has the same password protection as program project. 6. Cloud programming: The built-in cloud engine enables PLC remote programming, download, firmware upgrade, diagnosis, monitoring and debugging through HNC cloud, enabling easy remote connection and detecting on-site conditions at any time. Locally, the PLC can be programmed with a cloud engine built into the TP300 series HMI. 7. Program simulator: Can be simulated running PLC program in the case of complete separation from PLC,greatly reducing field debugging time and improving debugging efficiency. 8. Communication simulator: Equipped with a communication simulation tool specially designed for debugging communication instructions, it can simulate the process of PLC executing communication instructions and processing the data returned from the slave computer. 9. Online monitoring and debugging function: Provide up to 10 pages of component monitoring table, can choose to display data in different data formats, support mixed monitoring of bit components and register components and display component notes at the same time. 10 Unique real-time curve function: Real-time curve monitoring can be carried out on any register components to facilitate process control and debugging. 11. PLC execution file: The PLC source program can be generated into a PLC execution file that can be independently released and executed, convenient and safe to give the PLC execution file to the end user to download, there is no need to worry about the user knowing the source program content. 12. Firmware upgrade function: No matter CPU host or extension module, firmware can be upgraded for free. Even the previously purchased products can have various latest functions continuously introduced. 13. Powerful online PLC function: It can search out all PLC connected with the PC, show the information and status of all online PLC, and can choose any PLC for online monitoring, program download, firmware upgrade, control PLC running stop, etc. Programming instructions features: 1. Powerful innovation convenience instructions: on the basis of analyzing and absorbing various EXISTING PLC instructions, many powerful innovation convenience instructions are launched. Such as communication instruction (MODR, MODW HWRD HWWR), PID control (PID), valve control (VC), upper and lower alarm (HAL, LAL), send (SC), the temperature curve radius (TTC), only one instruction can implement other brand PLC need multiple instructions to realize the function, greatly improve the efficiency of programming and program run faster. 2. Instruction routines: In the help document, all instructions are explained in detail and corresponding routines are supported to be opened and downloaded into PLC. 3. Rich communication protocols: built-in Modbus TCP, Modbus RTU/ASCII protocol, free communication protocol and HNCbus high-speed communication protocol instructions independently developed by HNC. 4. Powerful communication instruction: No matter use what kind of communication protocol is simply a communication instruction can complete complex communication function, no conflict, to send and receive control for communication port, communication interrupt handling problems such as trouble, and the same communication port can use different protocols, complete the required all sorts of data exchange easily. 5. Powerful analog input processing: AI register can be used to directly access analog input, analog input support engineering conversion, sampling times setting and zero correction. 6. Powerful analog output processing: The analog output can be directly controlled by AQ register. The analog output can support engineering conversion and can be configured with blackout output holding function. 7. PID control function: Support 32 incremental PID, 32 self-tuning PID, 32 fuzzy temperature control, with TTC temperature curve control, VC valve control and other instructions to easily achieve a variety of complex control requirements of industrial site.

HHS Series High Performance Soft Starter

HHS series of soft starter is the latest development of HNC has an international leading technology of intelligent AC motor soft starter. HHS Series Soft Starter uses the power electronic technology, the microprocessor technology and the modern control theory technology, has the present international advanced level the new starting equipment. This product can effectively limit the starting current of asynchronous motor, which can be widely used in fan, water pump, compressor and other transportation and heavy equipment, is the star delta conversion, autotransformer, magnetron step-down    start ideal replacement equipment.

    HHS series of soft starter has excellent performance with the international high-end soft starter of the same, further strengthen the product reliability and environmental adaptability, humanization and professional design, can meet various application requirements.

......................................................................FEATURES........................................................................

1. Multi start mode: The maximum output torque can be obtained by the voltage ramp mode. The maximum current can be obtained by the constant current soft starter mode, which can be applied to the load with large static friction force 2. High reliability: The high performance microprocessor is used to process the signal in the control system, so as to avoid the excessive adjustment of the analog circuit in the past, so as to obtain excellent accuracy and execution speed 3. High performance: Programmable delay start mode, programmable interlocks control No sequence requirements for input power Starting time, parking time can be modified Dynamic fault memory function, easy to find the cause of the fault, up to ten faults can be recorded 4. Field bus full dynamic control monitoring starter, easy networking: Bus type is MODBUS. 5. Variety of protection functions: Protection against over voltage, under voltage, over temperature, phase loss, motor overload, etc.。 6. English character display function: LCD display a variety of operating parameters, programming and fault state with text prompts 7. Perfect humanized design: Beautiful appearance and reasonable structure Perfect function and simple operation Solid, reliable and compact The artistic design of industrial products 8. Reliable quality assurance: Computer simulation design STM patch production process Excellent electromagnetic compatibility High temperature aging, vibration test before the factory 9. Quick and thoughtful after-sales service: Reliable performance and quality lay the foundation for quality service Provide excellent and complete equipment design Timely and thoughtful use of consulting Continuously improve product performance according to user opinion.

HSV-180AD AC380V Servo Drive

HSV-180AD digital AC servo drive is a high-voltage feed drive based on HSV-18D. The drive unit uses AC 380V power input, and features compact architecture, easy operation, and high reliability. HSV-180AD digital AC servo drive unit uses the latest technology such as digital signal processor (DSP) for motion control and intelligent power module (IPM) to achieve a closed-loop servo control of position, speed, and torque for permanent magnet AC synchronous servo motors. HSV-180AD digital AC servo drive unit provides protection functions for short circuit, overcurrent, overvoltage, undervoltage, overload, overheat, and pump. It integrates communication interface, pulse input interface, analog input interface, and small keypad debugging digital display.   ...................................................................FEATURES..........................................................................
  1. High Performance AC digital servo drive
  2. Easy and flexible control (five control modes)
  3. Full state display
  4. Various interface and control modes
  5. Applicable to situations that requires high speed and high power
  6. Double encoder interfaces that can be connected to position feedback components such as grating ruler to form full-closed loop position control system
 

HT3000 IoT HMI

On the basis of satisfying functions of general HMI, HT3000 series HMI can also perfectly realize all functions of IoT through HNC cloud platform, cloud engine and cloud APP. HNC Cloud is a cross-platform industrial Internet of Things cloud platform that supports PC, iPad, Android,and iOS multi-platform terminals. Simply put, HNC Cloud is a complete set of cloud service solutions forthe automation industry. It covers HNC Cloud website, cloud configuration, cloud HMI, cloud APP and other products. Through the HNC cloud platform, users can remotely access machines and equipment on the site thousands of miles away, realize remote monitoring and maintenance of HMI and PLC, realize remote programming, firmware upgrade, diagnosis, monitoring and debugging, etc. In summary, the HNC cloud platform has 9 major Features, it can help users realize the functions of cloud networking, cloud access, cloud video, cloud alarm, cloud engine, cloud management, cloud security, cloud translation and cloud map. The HNC Cloud provides a secure communication mechanism. It uses 128-bit SSL encryption to ensure stable data transmission. A-Key and B-Key protection mechanisms are also set up on the device side to ensure the safety and reliability of remote access devices. The IoT BUS APP supports iPad, Android, and iOS multi-platform terminals. Users can search for “IoT Bus” for free download through the major APP application stores. On the basis of satisfying functions of general HMI, HT3000 series HMI can also perfectly realize all functions of IoT through HNC cloud platform, cloud engine and cloud APP. HNC Cloud is a cross-platform industrial Internet of Things cloud platform that supports PC, iPad, Android,and iOS multi-platform terminals. Simply put, HNC Cloud is a complete set of cloud service solutions forthe automation industry. It covers HNC Cloud website, cloud configuration, cloud HMI, cloud APP and other products. Through the HNC cloud platform, users can remotely access machines and equipment on the site thousands of miles away, realize remote monitoring and maintenance of HMI and PLC, realize remote programming, firmware upgrade, diagnosis, monitoring and debugging, etc. In summary, the HNC cloud platform has 9 major Features, it can help users realize the functions of cloud networking, cloud access, cloud video, cloud alarm, cloud engine, cloud management, cloud security, cloud translation and cloud map. The HNC Cloud provides a secure communication mechanism. It uses 128-bit SSL encryption to ensure stable data transmission. A-Key and B-Key protection mechanisms are also set up on the device side to ensure the safety and reliability of remote access devices. The IoT BUS APP supports iPad, Android, and iOS multi-platform terminals. Users can search for “IoT Bus” for free download through the major APP application stores. 1. 16 million true color TFT LCD, LED backlight, rich and real content. 4G Flash + 512M RAM. 2. Integrated HNC Cloud service, built-in HNC cloud engine. Support serial port / U disk / SD card / Ethernet / HNC cloud and other methods of program download. 3. Support third-party SCADA software programming management. Support cloud/mobile phone access control, strong operability. 4. Innovative A/B Key security mechanism, multilingual automatic translation, mobile payment support, weather forecast display. 5. Multi-screen networking. The innovative network networking method is easy, fast, convenient and practical. Support multiple terminal size screen custom display, multi-screen interactive management. 6. Support MQTT protocol. Can be connected to the database server, easily realize data collection and reporting, and dock with ERP/MES and other systems. 7. Support cloud transparent transmission. Can remotely program, upload and download, firmware upgrade, diagnosis, monitoring and debugging PLC program. Detect on-site abnormal conditions anytime and anywhere. 8. Support edge computing. Realize edge computing through the built-in script engine, function calculation, and interaction with device data in the terminal. 9. Support multiple third-party protocols. Built-in a variety of industrial equipment drivers, support the current mainstream PLC,VFD, instruments. 10. Integrated cloud access & alarm push, You can easily perform remote cloud access control on local or remote HMI devices through cloud APP and cloud website. Real-time abnormal monitoring alarm, the alarm information is pushed to the designated management personnel in real-time. Alarm notifications can be received via mobile APP, SMS, etc.

HV390 Series Mini Design Frequency Inverter

HV390 is the newest AC inverter with compact design from HNC Electric, Thanks to advanced current vector control algorithm and newest hardware, HV390 has high stability and perfect motor control performance. Based on listening and understanding of customers’ requirement, HV390 supports full range of input voltage ( AC 120V / 220V / 380V / 460V and etc.) , complete functions for different countries and applications. *Mini design housing suitable for micro automation such as packaging machine, labeling machine, conveyor belt etc. *Installation back mounting system can insert the inverter directly into the rack *Programmable DI/DO/AI/AO as well as RS485 Modbus RTU make easy communication with other devices *Integrated PID function support most of water supply applications *Integrated multi-speed function support most of texitile application  

1. Advanced motor control technology support both Open loop vector control(SVC) and V/F control.

2. Different input voltage( 220V single phase/220V 3 phase/380V 3 phase/460V 3 phase).

3. High starting torque characteristics and precise speed control.

4. Suitable for all regions which have different grid and voltage.

5. All product type integrate force-cooling fan.

6. Built in simple PLC, PID , programmable I/O terminals, RS485 interface, analog input / output control function and other rich control functions

7. Mini design housing suitable for micro automation such as packaging machine, labeling machine, conveyor belt etc

HV480 Series High Performance Frequency Inverter

New HV480 series is a general current vector control inverter integrated with the performance and features in a high degree. HV480 with industry-leading drive performance and functionality control, using unique current vector control algorithm can efficiently drive induction motor to achieve high accuracy, high torque and high-performance control. Detachable keyboard,support copy parameters by keypad, debugging software on PC, built-in EMC filter, reduce EMC interference, .ect. These optimized designs make HV480 series an industry-leading product and bring tangible benefits to customers. Customer success, Market Service!HV480 in terms of performance and control are worthy of trust! 1. Advanced motor control technology support Open loop vector control(SVC) and V/F control. 2. Different input voltage(220V single phase/220V 3 phase/380V 3 phase/460V 3 phase). 3. High starting torque characteristics and precise speed control. 4. Rich and flexible I/O accesses and field bus options. 5. Suitable for all regions which have different grid and voltage. 6. Upgrade I/O(NPN/PNP compatible) can meet more application requirement without controller(PLC) . 7. Programmable DI/DO/AI/AO, and Modbus RTU make easy communication with other devices. 8. Detachable keyboard,support copy parameters by keypad, support keyboard extension. 9. Debugging software, suitable for parameter set, waveform monitor, optimizing device performance. 10. Multi-pumps control, constant pressure water supply function. 11. Built-in EMC filter, reduce EMC interference , reduce malfunctions and improve accuracy. 12. Kinds of communication cards are available, Easy to integrate into the network to help Industry 4.0.

HV580L Series Elevator Inverter

HV580L series frequency inverter is the professional for elevator of HNC. It concludes below improvement & innovation based on the ordinary V/F inverter. With the high-end design and high quality and reliability, HV580 series inverter will bring the users all new experience.
  • 1. Smooth ride performance
  • 2. Integrated brake control
  • 3. Default factory setting user friendly factory, get you started quickly.
  • 4. 4-Indepenent S-Ramps
  • 5. Programmable DC –injection braking
  • 6. Complete functions for elevator application

HV580L series elevator inverter has Perfect performance: 1.     Simplified parameter for easy start up 2.     Comprehensive trip diagnostics 3.     High start torque 180%/0Hz at FVC 4.     Automatic torque boost 5.     Slip compensation 6.     Flexible programmable I/O connection 7.     Output frequency 0~300Hz 8.     In-built dynamic braking unit 9.     To protect the mechanical torque limitation 10.  High starting torque feature. 11.  Superior responsiveness 12.  Motor overheating protection 13.  Prompt current limit function

HV590 Series FVC High Performance Frequency Inverter

New HV590 series is a general current vector control inverter integrated with  the performance and features in a high degree. HV590 with industry-leading drive performance and functionality control, using unique current vector control algorithm can efficiently drive induction motor to achieve high accuracy, high torque and high-performance control. Customer success, Market Service!HV590 in terms of performance and control are worthy of trust!   ....................................................................FEATURES......................................................................... 1.Advanced motor control technology support both Open loop vector control(SVC), Closed loop vector control(FVC) and V/F control. 2.Different input voltage(220V single phase/220V 3 phase/380V 3 phase/460V 3 phase). 3.High starting torque characteristics and precise speed control. 4.Rich and flexible I/O accesses and field bus options. 5.Suitable for all regions which have different grid and voltage. 6.Upgrade I/O(NPN/PNP compatible) can meet more application requirement without controller(PLC) like elevator, textile etc. 7.Programmable DI/DO/AI/AO as well as RS485 Modbus RTU make easy communication with other devices.

Photoelectric Sensor

Complete models: including diffuse reflection, retro-reflection, and through-beam type. Various installation methods: including cylindrical installation and square installation. Large monitoring range: from 5cm to 50m, according to your needs, we provide the most suitable products for you. Photoelectric sensors are sensors that use various properties of light to detect the presence or absence of an object and change in surface state. They are mainly composed of a light-emitting projection unit and a light-receiving unit that receive light. If the projected light is blocked or reflected depending on the detection object, the amount of light reaching the light-receiving part will change. The light receiving unit detects this change and converts it into an electrical signal for output.   Optimized circuit design, strong anti-interference ability High reliability and high accuracy Metal case for easy installation and protection Adjustable sensitivity Suitable for multiple applications Compact design with built-in amplifier Far distance detection

SPARE PARTS

For All Textile Machineries.

Azbil Temperature controller-C26TR0UA2000

Brand:
Azbil
Country/Region of Manufacture:
Japan
Model:
SDC26
MPN:
C26TR0UA2000

Barco Sedo Profibus 16

Profi 16

External I/O modules

These units are part of the modular design initiative that enable our Sedomat controllers to operate using either their own I/O, remote I/O or an optimization of the two. These peripheral modules connect to the controllers using a PROFIBUS DP interface and offer both digital and analogue inputs and outputs. Both the Profi 16 and 32 were specialy designed fo the automation of textile finishing machines and are compatible with modules from other suppliers.

Optimized for the use in textile finishing

Profibus DP:

PROFIBUS DP is a world wide accepted standard field bus for the connection of inputs, outputs, frequency inverters, PLC components, sensors, valves, remote displays etc. This standard industry bus has been chosen as part of our open connectivity strategy. The field bus concept significantly reduces the panel building overhead by eliminating a large part of the wiring. World wide, thousands of PROFIBUS DP ready peripherals are available so providing an enormous choice of components. This flexibility and freedom of choice will have a positive effect on performance and price of the machine automation. The PROFIBUS DP field bus is supported by Siemens, Klöckner Moeller, Mitsubishi, Matsushita, Allen-Bradley, Omron, Weidmüller, Wago, Lenze, KEB, Hitachi, Festo, Parker, etc.

Concept:

  • All inputs are equipped with green, all outputs with red LED’s.
  • All inputs and outputs are optical isolated.
  • 4 Status-LED’s showing the actual status.
  • All connections equipped with plug-in terminals.
  • Ready to use Profibus cable in desired length on request.

Specifications:

 
Inputs:
  • 2 analogue inputs 0 - 20mA or 4 - 20mA
  • 2 PT100 temperature inputs 0-150°C
  • 16 digital inputs
  • 2 counter inputs 800Hz
Outputs:
  • 4 analogue outputs 0 - 20mA or 4- 20mA
  • 16 digital outputs (max. 0.5A)
Fieldbus: Profibus DP Slave
Power supply: 24V DC (19-32V)
Dimensions: 243.3 x 133 x 54.6mm (w x h x d)

Burner Controller LQA-24

Product Specification

Voltage 220-240 V
Frequency 50/60 Hz
Input Voltage 3 VA
TS Max 10s
Minimum Order Quantity 1

Erhardt+Leimer Digital Controller DC5501

Erhardt+Leimer Digital Controller DC5501

Brand: Erhardt + Leimer Model No: DC5501
Erhardt Leimer (E+L) Digital Controller DC5501

Infrared edge sensor FR 5503

Product description
  • Used for optical and mechanical scanning of web edges in tenters
  • Infrared edge sensor based on the reflection principle
  • Reliable scanning of the web edge even on contrast-rich printed materials and low-reflective colors
  • In case of uneven web edges, mechanical scanning by pivoting in the scanning lever will dampen the control
  • Measuring range: ±10 mm
Technical Specifications
Nominal supply voltage 24 V DC
Permitted supply voltage range 20 to 30 V DC (ripple included)
Current consumption 100 mA
Power consumption 2.4 W
Scanning frequency 100 Hz
Measuring range +/- 10 mm
Distance edge sensor - web 36 mm
Protection class Max. IP 65 with suitable connector inserted
Ambient temperature +10 °C to +60 °C
Storage temperature -10 °C to +80 °C
Weight without scanning lever 0.37 kg
Weight with scanning lever 0.46 kg

Omron CJ1W-PA202 (CJ1W-PA202) Processor/Controller

About this product

PROXIMITY & PHOTOELECTRIC SENSOR

All type & brand proximity & photoelectric sensor.

TRUST ENGINEERING MANUFACTURAR

All Packaging Machineries

Repairing Service

Industrial Electronics Repairing Service

Self Talk of Trust

Our Company

Trust Resources is one of the most reputed organizations in Bangladesh for different kinds of Textile Dyeing, Finishing Machinery & Spare Parts Supplier since 2010. It has self-supported expertise in technical teams with modern tools & technology. We are authorized sole-agent of some world-class manufacturers in Bangladesh. We believe that high-quality products & services are the most important factors in our industrial sector for developing our country. The company enjoys a good reputation due to its quality product sales and after-sales services, innovation, productivity, and customer support. The company is looking forward to providing efficient customer service, support, and better technology to the local market.

Company Gallery

Our Services & Solutions

  • RTUL–Indo–Swiss joint Venture: Roop Telsonic ultrasonix.

  • DONG NAM – Korea: knit Finishing Machineries.

  • Sut Lick – Singapore: Tumble dryer, Washing & Hydro machine.

  • Peacock –Taiwan: Tumble Dryer, Washing & Hydro machine.

  • Recondition Machineries (Dyeing, Finishing, Printing, Spining, Boiler, Generator).

  • Industrial Automation.

  • Akaram – Switzerland: Textile printing Blanket, Rotary & Flat Bed.

  • Akaram – Switzerland: Compacting Felt, Teflon Sheet, Conveyor Belt.

  • Inverter Telecanique(Schineder), Lenze, Siemens, LS Industrial System, ABB.

  • RJ – China: Conveyor Belt

  • Autonics – Korea: Sensore & controllers.

  • Erhardt + Leimer, E+L – Germany: All types Parts.

  • VIPA – Germany : Art of automation.

  • Gefran – Italy: Load Cell.

  • Burner Controller (Siemens, Honewell, krom Schroer).

  • Spare Parts for Bruckner Stenter M/c

  • Spare Parts for Fongs Dyenig M/c

  • Chain Link & Pin Pilate for stenter, Compacror & Dryer m/c

  • Services & Repair All Kinds of Industrial Electronics devices.