Showing all 8 results

Show sidebar

CUTTER CYLINDER

Description

The aim of this cylinder is the cutting and the elimination of the yarns that aren’t levelled by the shearing machine

Manufacturing Features

  • Manufactured in tube in a special steel, rectified and chromium-plated
  • Pivots rectified and shrinking on
  • Blades support in stainless steel
  • Cutter applied following the working need
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, grant the respect of the functional features and of the safety regulations
 

Functional Features

  • Dynamic balancing with certification related to the speed required by the Customer
  • Longitudinal and torsional rigidity suitable for avoiding undesired deformations vibration
  • Maximum simplicity in the substitution of the damaged cutters
  • Long working life even in hard exercise conditions

CYLINDER BRUSH

Description

The aim of these brushes is the cleaning, the polishing of the fabric during the different working phases, especially in the working and in the finishing of the fabrics in wool

Manufacturing Features

  • Internal part in tube in stell
  • Pivots in steel, shrinking on
  • Covered with tube in moplen
  • Trimmed with horse hair, bristle, nylon, tampico
  • The bristle disposition can be full, helical, bi-helical
  • Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, grant the respect of the functional features and of the safety regulations
 

Functional Features

  • Dynamic balacing with certification related to the speed required by the Customer
  • Longitudinal and torsional rigidity suitable for avoiding undesired deformations and vibrations
  • Long working life even in hard exercise conditions

CYLINDER BRUSH FOR PRINTING MACHINE

Description

These cylinder brush are able to remove the traces of colour left on carpets during the printing phase

Manufacturing Features

  • Internal part tube in steel
  • Heads and pivots in steel or inox, shrinking on. The pivots are rectified and if required, they are fixed by screws in order to facilitate the substitution
  • There is a special covering for the tube in steel in order to avoid the corrosion due the chemical agents
  • The bristle disposition can be full, helical and bi-helical
  • Normally trimmed with bristles in nylon, but on request, it can be supplied with any other kind of material
  • Turned and levelled surface for a perfect circularity and concentricity respect to the axe of rotation
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, grant the respect of the functional features and of the safety regulations

CYLINDER BRUSH FOR REASING MACHINE IN EXTRUSION IN ALVEOLAR ALUMINIUM

Description

The aim of this cylinder is the cleaning of the reasing cylinder. With this new brush typology it has been possible to insert the simple interchangeability of the damaged brush plates, by reducing in a satisfactory way the stop of the machine and, in the meanwhile, it has been inserted a new support concept in alveolar aluminium that reduces notably the mass in rotation.

Manufacturing Features

  • Internal part in alveolar aluminium patented
  • Pivots in steel, rectified, and shrinking on
  • Covered with staves in aluminium patented for the brush plates fixing in nylon or metallic
  • Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, grant the respect of the function al features and of the safety regulations
 

Functional Features

  • Dynamic balancing with certification related to the speed required by the Customer

CYLINDER BRUSH WITH THERE STAVES FOR THE RAISING MACHINE

Description

The aim of this cylinder is the cleaning of the teasiling cylinder. With this new brush typology, it has been possible to insert the simple interchangeability, of the damaged brush plates, by reducing in a satisfactory, way the stop of the machine and it has been possible to insert brushes with elevated heights until 4600mm. Thanks to the special antivibrating element that makes them more rigid and more compact

Manufacturing Features

  • Internal part in tube in special steel
  • Special antivibrating element
  • Pivots in steel, rectified and shrinking on
  • Covered with staves in aluminium patented for the brush plates fixing in nylon or metallic
  • Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, gran the respect of the functional features and of the safety regulations
 

Functional Features

  • Dynamic balancing with certification related to the speed required by the Customer
  • Longitudinal and torsional rigidity suitable for avoiding undesired deformations and vibrations
  • Maximum simplicity in the substitute on the damaged brush plates
  • Long working life even in hard exercise conditions

LAPPING BRUSHES

Description

The aim of these bushes is to have a homogeneous lapping effect, avoiding any problems of rows and folds over the entire surface of the fabric.

Manufacturing Features

  • Manufactured with a tube of special steel
  • The pins are ground and hot introduced
  • A wide choice of grain and abrasive section
  • The hole is specially arranged so to allow the tissue to remain stretched all the time
  • Manufactured in accordance with the Costumer’s dimensions and features
  • The materials and the machining processes we use are a guarantee for complying with the functional features and the safety standards
 

Functional Features

  • Dynamic balance with certification, based on the speed requested by the Customer
  • Longitudinal and torsion stiffness suitable for avoiding unwanted deformation and vibrations
  • A high resistance of the abrasive bristles, even under hard working conditions and on several kinds of tissues

LAPPING BRUSHES EQUIPPED WITH CERAMIC COATED BRISTLES

Description

The iam of these brushes is to have a homogenous effect of grinding, avoiding problems of rows and folds over the entire surface, producing new effects on the fabric

Manufacturing Features

  • Manufactured in a special aluminium
  • Bristles in rilsan resistant at high temperatures
  • The bristles are placed on a tile in aluminium with hand-made sewings, in order to grant a higher bristle tightness, for the great effort to which it is subjected
  • Turned and levelled external surface for a perfect circillarity and concentricity respect to the axe of rotation
  • Manufactured by respecting the dimensions and the features chosen by the Customer
  • The materials and the working processes used, grant the respect of the function al features and of the safety regulations
 

Functional Features

  • Possibility to assemble the tiles on the surface of any other cylinder
  • Maximum easyness in the substitution of the damaged tiles
  • Long working life even in hard exercise conditions

RIBBONS BRUSH TRIMMED

Description

The aim of these ribbons is the interchange ability simplicity, at the present in use both for the teasiling machine and for the wool carding machines and for the other workings where there is the need of an immediately replacement

Manufacturing Features

  • Manufatured with a special base, with more levels, that allows to avoid deformations during the working phases
  • The trimming can be with the application of horse hair, bristle, nylon, tampico
  • The materials and the working processes used, grant the respect of the functional features and of the safety regulations
 

Functional Features

  • Application simplicity on any surface, circular of flat
  • Longitudinal and torsional rigidity suitable for avoiding undesired deformations
  • Long working life even in hard exercise conditions